Please note we are we are short staffed 4/18 to 4/30. Shipping will only happen 2 days a week during this time. Thank you for your patience.



Vaterra Ascender Bronco: Tail Light Bucket & Lens Set

Sale price $15.00 Regular price $17.25

Shipping calculated at checkout.

This are light buckets designed to fit the Vaterra Ascender Bronco body. They measure 1in tall and 1/2in wide. They can either be glues in place or screwed in place. To complete this kit, you can add the lens covers of your choice.

LED Size: 5mm and 3mm (Holes may require slight trimming for a snug fit. It's designed this way so that you can adjust for your preferred size LED's.)

This is for the Light bucket, hardware, LED retainer, and translucent red Lens or Translucent Clear lens. Bucket color may vary and detail is needed to for a completed look.

Includes Team KNK hardware.

Recommended Tools for installation:

Cut off wheel to trim body
Drill Bits: 1/16th, 5/64th, 2/32nd, 1/8th, 3/16th
Exacto
Hex Drive: 1.5mm and 2.5mm
Paint detail to suit

NOTE:
This item is 3D printed. Due to the nature of 3D FDM printing this item
may contain tiny visual blemishes and may require some trimming and
detail painting for optimal visual appeal/fit. Similar to what you would expect to do with model parts. These blemishes in no way affect the functionality of the part. 3D printed items are susceptible to heat and may warp if left in direct sunlight. This can easily be corrected with a hair dryer or light heat gun use. Care should be taken to not leave in hot cars or direct sunlight. A coat of paint will help with this.